Denon AVR-2112CI, Integrated Network AV Receiver Parameter Check, Retrieving Audyssey® Auto Setup settings, Making the network settings (Network Setup)

Set up speakers (Audyssey® Auto Setup)

Parameter Check

This function enables you to check the measurement results and equalizer characteristics after Audyssey® Auto Setup.

1 Use uito select “Parameter Check” and then press ENTER.

Auto Setup

Auto Setup	Sp. Config. Check
Parameter Check	Distance Check
	Ch. Level Check
	Crossover Check
	EQ Check

2 Use uito select the item you want to check, then press ENTER or p. Measurement results for each speaker are displayed.

Sp.Config. Check Check the speaker configuration.

Distance Check Check the distance.

Ch. Level Check Check the channel level.

Crossover Check Check the crossover frequency.

EQ Check Check the equalizer.

•If “EQ Check” is selected, press ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to

be checked.

Use o p to switch the display between the different speakers.

3 Press RETURN B.

The confirmation screen reappears. Repeat step 2.

Retrieving Audyssey® Auto Setup settings

Making the network settings (Network Setup)

This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and still image (JPEG) files stored on a computer.

1 Connect the Ethernet cable (vpage 12 “Connecting to a home network (LAN)”).

2 Turn on this unit (C page 5 “Getting Started”).

This unit performs automatic network setup due to the DHCP function.

When connecting to a network that has no DHCP function, perform the setting in “Network Connect.” (vpage 91).

version Basic

version Advanced

Information

If you set “Restore” to “Yes”, you can return to Audyssey® Auto Setup measurement result (value calculated at the start by MultEQ® XT) even when you have changed each setting manually.

20