The status of devices connected to the same network can be displayed. Additionally, network menu browsers and volume controls can be performed via the network for the connected devices.
This is useful when playing back network services of a device located in a separate room.
Only devices compatible with the Zone Management function can be operated.
With the Zone Management function, the network menu screen and playback screen of the target device to be controlled are displayed but playback with this unit is not possible. If you also want to play the same music as the other device, use the Party Mode function.
1 Press uito select “Network Setup” – “Other” – “Zone Management” from the menu, and then press
ENTER or p.
Other
Network Standby
Character
PC Language
Friendiy Name
Party Mode
Zone Management
Notification
2 Press ui to select the Friendly Name of the device, and then press ENTER or p.
Zone Management | [1/1] |
3 Press uito select “Device Control”, and then press
ENTER.
When the device control mode is started, the network menu of the connected device is displayed on this unit’s television screen.
DENON:[AVR-2112CI]
Model | |
Power | On |
Select Source | BD |
Volume Level |
Device Control
[ENTER] Enter | [RETURN] Return |
NOTE
•If the selected device is compatible with the Zone Management function, “Device Control” mode starts.
•If the selected device is in Party Mode or being controlled with Zone Management, “Device Control” is not displayed.
4 Press uiopand ENTER to select the desired track.
[1/7] |
|
| |
| REMOTE CONTROL |
|
|
|
|
Favorites
Internet Radio
Media Server
Flickr
Napster
Pandora
Rhapsody
MENU Exit | CH+ Vol.up | CH- Vol.down |
•When in device control mode, 
is displayed on the
television screen of the controlling device, and 
is displayed on the television screen of the device being controlled.
Convenient functions
The zone management function can only be used on a combination of DENON devices that are equipped with the zone management function.
NOTE
•The volume of the selected device can be controlled using CH+ (volume up) and CH– (volume down) of this unit, but the volume level is not displayed. Be careful not to increase the volume too high.
•For services that require an account, set the account settings on the target device in advance. Also, some functions of the device may be restricted in “Device Control” mode.
nnTo end “Device Control” mode1 Press MENU in “Device Control” mode.
“Exit Device Control Mode?” is displayed on the TV screen.
2 Press opto select “Yes”, then press ENTER.
“Power off Remote component?” is displayed on the TV screen.
3 Press opto select “Yes” or “No”, then press ENTER.
Yes Turns off the target device and ends “Device Control” mode.
No Ends “Device Control” mode without turning off the power off the target device.
“Device Control” mode can also be ended from the controlled device side.
qPress MENU on the controlled device.
wWhen “Exit Device Control Mode?” is displayed on the TV screen, select “Yes” and then press ENTER.
version Basic
version Advanced
Information
•Displays up to a maximum of 10 DENON products connected on the same network.
BD | 66 |