| Audio Setup | Default settings are underlined. |
|
|
|
Make settings for audio playback. |
| |
|
| |
Setting items | Setting details | |
| System Setup |
|
|
Setting items | Setting details |
|
|
2ch Direct/Stereo | Distance FL / Distance FR : Select the speaker. |
(Continued) | • 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to |
| the speaker. |
| Set the difference in the distance between the speakers to less than |
version Basic
2ch Direct/Stereo Select the method for setting the speakers used in the
Setting : Select the method for setting the speakers used in the
•Basic : The settings at “Speaker Setup” (vpage 86) are applied.
•Custom : Make separate settings for
Front : Set the front speaker size.
•Large : Use a large speaker that can adequately play back low frequencies.
•Small : Use a small speaker that has inadequate playback capacity for low frequencies.
If “Speaker Config.” – “Subwoofer” (vpage 86) is set to “No”, the setting is automatically set to “Large”.
SW : Set the presence of a subwoofer.
•Yes : Use a subwoofer.
•No : Select when a subwoofer is not connected.
If “Speaker Config.” – “Subwoofer” (vpage 86) is set to “No”, the setting is automatically set to “No”. If the “Front” setting is
| 20.0 ft (6.00 m). |
| Level FL / Level FR : Select the speaker. |
| • |
Auto Surround | ON : Memorize settings. Automatically play with the last used surround |
Make setting for | mode. |
memorizing surround mode | OFF : Do not memorize settings. Surround mode does not change |
setting for each input signal | according to input signal. |
type. |
|
• The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below.
q Analog and PCM
w Dolby Digital and DTS
• When playing in PURE DIRECT, the surround mode does not change even if the input signal is changed.
version Advanced
“Small”, the setting is automatically “Yes”.
SW Mode : Select low range signals to be reproduced by subwoofer.
•LFE : When the “2ch Direct/Stereo” – “Front” setting is set to “Large”, the LFE signal alone is output from the subwoofer. Also, when the “2ch Direct/Stereo” – “Front” setting is set to “Small”, the front channel low range signal is added to the LFE signal output from the subwoofer.
•LFE+Main : The front channel low range signal is added to the LFE signal output from the subwoofer.
This setting can be set made “2ch Direct/Stereo” – “SW” is set to “Yes”.
Crossover : Set the maximum frequency of the bass signal output from each channel to the subwoofer.
•40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
•This setting can be set made “2ch Direct/Stereo” – “SW” is set to “Yes”.
•If the “2ch Direct/Stereo” – “Front” setting is “Large” and the “SW Mode” setting is “LFE”, “Full Band” is displayed and the setting cannot be made.
EQ Customize Set the disengaged equalizers to not display when the “MultEQ® XT” is selected.
The equalizer mode in which “Not Used” is selected cannot be stored and recalled in the Quick Select function.
Audyssey Byp. L/R : Set when not using “Audyssey Byp. L/R” equalizer.
•Used : Use.
•Not Used : Do not use.
Set so that “Audyssey Byp. L/R” settings can be made when Audyssey® Auto Setup is performed.
Audyssey Flat : Set when not using “Audyssey Flat” equalizer.
•Used : Use.
•Not Used : Do not use.
Set so that “Audyssey Flat” settings can be made when Audyssey® Auto Setup is performed.
Manual : Set when not using the “Manual” equalizer.
•Used : Use.
•Not Used : Do not use.
Information
BD | 90 |