6.1-channel (Surround back speaker) connection

If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the SURR. BACK/AMP ASSIGN terminal.

For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” (vpage 52).

To perform 6.1-channel playback using the surround back speaker, set “Amp Assign” to “NORMAL” in steps 3 and 4 for “Set up “Amp Assign”” (vpage 58).

Also use the “Speaker Config.” setting (vpage 86) to set “S.Back” to “1spkr”.

NOTE

For speaker cable connections, see C page 6 “Connecting the speakers”.

For speaker impedance, see page 53.

55

FL SW

FR

 

C

SL

SR

SB

Connect

version Basic

version Advanced

Information