Denon AVR-2112CI, Integrated Network AV Receiver RESTORER, Manual EQ, Audio Delay

Audio Adjust

Manual EQ	Default settings are underlined. RESTORER

Basic

Use the graphic equalizer to adjust the tone of each speaker.

“Manual EQ” can be set when “MultEQ® XT” setting (vpage 81) is “Manual”.

Setting items	Setting details

Adjust Channel	q Select the speaker tone adjustment method.
Correct the tone of each	All : Adjust the tone of all speakers together.
speaker.	L/R : Adjust the tone of left and right speakers together.
	Each : Adjust the tone of each speaker.
	w Select the speaker.
	e Select the adjustment frequency band.
	63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
	• Select the speakers you want to adjust when “L/R” or “Each” is
	selected.
	r Adjust the level.
	–20.0dB – +6.0dB (0.0dB)

Curve Copy	Yes : Copy.
Copy “Audyssey Flat” curve	No : Do not copy.
from MultEQ® XT.

•“Curve Copy” is displayed after Audyssey® Auto Setup has been performed.

•When you select “Curve Copy” and press ENTER, the “Set EQ curve to

Audyssey Flat?” prompt is displayed. Select either “Yes” or “No”, and press ENTER.

DefaultYes : Reset to the defaults.

	The “Manual EQ” settings No : Do not reset to the defaults.
	are returned to the default	When you select “Default” and press ENTER,
	settings.	When you select “Default” and press ENTER,
	settings.	the “Return settings to the default?” prompt
		the “Return settings to the default?” prompt
		is displayed. Select either “Yes” or “No”, and
		press ENTER.

Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals.

Setting details

OFF : Do not use RESTORER.

Mode1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.

Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.

Mode3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.

•This item can be set with analog signals or PCM signal (fs = 44.1/48 kHz) is input.

•“RESTORER” settings are stored for each input source.

•This item default setting for “iPod” and “NET/USB” is “Mode3”. All others are set to “OFF”.

•When set to something other than “OFF”, is displayed.

•This cannot be set when the surround mode is set to “DIRECT” or “PURE DIRECT”.

Audio Delay

Default settings are underlined.

While viewing video, manually adjust the time to delay audio output.

Setting details

0ms – 200ms

•This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” is set to “ON” and when a TV compatible with Auto Lip Sync is connected.

•Store “Audio Delay” for each input source.

•Audio Delay for game mode can be set when “Video Mode” (vpage 102) is set to “Auto” or “Game”.

version

version Advanced

Information