NOTE

•When “HDMI Control” is set to “ON”, it consumes more standby power.

•The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.

•Some functions may not operate depending on the connected TV or player. Check the owner’s manual of each device for details beforehand.

•When “P.Off Control” on the menu is set to “OFF” (vpage 89), this unit is not set to standby even if the connected device is in the standby mode.

•When connection changes are implemented, such as adding connections to HDMI devices, linked operations may be initialized. In this case, you will need to reconfigure the settings.

•When “HDMI Control” is set to “ON”, it is not possible to assign an HDMI connector to “TV” at “Input Assign” (vpage 101).

•Should any of the operations below be performed, the interlocking function may be reset, in which case, repeat steps 2 and 3.

•“Input Assign” – “HDMI” (vpage 101) setting has changed.

•There is a change to the connection between the devices and the HDMI, or an increase in devices.

Convenient functions

Sleep timer function

The power automatically goes into standby once the set time has elapsed.

This is convenient for playing sources while going to sleep.

Press SLEEP and display the time you want to set.

The “SLEEP” indicator on the display lights.

•The time switches as shown below each

time SLEEP is pressed.

OFF 10 min 20 30 40 50

120 110 100 90 80 70 60

•If SLEEP on the main unit is pressed, the same function as with the remote control unit can be obtained.

To confirm the countdown time before putting the unit to sleep

Press SLEEP.

“Sleep : zmin” appears on the display. zz Countdown time

version Basic

version Advanced

To cancel the sleep timer

Press SLEEP to set “OFF”.

The “SLEEP” indicator on the display turns off.

•The sleep timer setting is canceled if this unit’s power is set to standby.

•The sleep timer function can be set separately for the different zones (vpage 72 “Sleep timer function”).

BD

61

Information