Use o | p | to select the | 7 |
5 configuration | of the connected | ||
speakers. |
|
|
|
NORMAL | Select the “NORMAL” setting to perform |
| |
|
| ||
| speakers. |
| |
ZONE2 Select the “ZONE2” setting to assign the unit’s
speakers via the
Use ui to select “Channel Select”, and then press
ENTER.
Audyssey Auto Setup | MultEQ XT |
Preparation
Set the following items if necessary.
Amp Assign
Channel Select
Auto Setup Start
[ENTER] Enter | [RETURN] Cancel |
Set up speakers
9 Press opto select a front speaker.
ASelect this to use front speaker A.
BSelect this to use front speaker B.
A+B Select this to use front speakers A and B simultaneously.
10Use o p to set whether or not a subwoofer channel is measured.
Measure Set for measuring a subwoofer.
Skip Set for no measuring of a subwoofer.
11Use o p to set whether or not a surround back channel is measured.
Measure Set for measuring two surround back speakers. |
version Basic
version Advanced
Front B Select the “Front B” setting to use the second set of front speakers for playback.
F.HEIGHT Select the “F.HEIGHT” setting to use the front height speaker for playback.
6 Press RETURN Bto exit the “Amp Assign” setting.
Channel Select
Subwoofer 
Measure
[RETURN] Return
(2 sp) |
|
|
|
Measure | Set for measuring a surround back speaker. |
(1 sp) |
|
| Set for no measuring of a surround back speaker. |
Skip |
12Press RETURN B.
Proceed to page 16 STEP1 Preparation step 6.
NOTE
After performing Audyssey® Auto Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform
Information
8 Use uito select a channel.
Front Select for setting the front speakers to be used. In this case, go to step 9.
•“Front” can be set when “Amp Assign” is set to “Front B”.
Subwoofer Select for no subwoofer to be used. In this case, go to step 10.
Surround Select the number of surround back speakers to be
Back used. In this case, go to step 11.
•“Surround Back” can be set when “Amp Assign” is set to “NORMAL”.
Audyssey® Auto Setup again.
59