Adjusting the volume of the speakers

You can adjust the channel level either according to the playback sources or to suit your taste, as described below.

nnAdjusting the volume of the different speakers

1 Press ZONE SELECT to switch the zone mode to J(MAIN ZONE).

The J indicator lights.

 

Press AMP to set the remote

2 control unit to AMP-operation

 

mode.

 

 

 

 

 

3 Press CH LEVEL.

 

Channel Level

 

 

 

Front L

-8.5dB

 

 

Front R

-11.5dB

 

 

Subwoofer

0.0dB

 

 

Subwoofer

ON

 

 

 

 

 

 

 

 

 

5 Use o p to adjust the volume.

You can directly turn “OFF” the subwoofer outputs during

2-channel playback in DIRECT or STEREO mode.

Select “Subwoofer” and use o p to select “ON” or “OFF”.

Channel Level

 

Front L

-8.5dB

 

 

Front R

-11.5dB

 

 

Subwoofer

OFF

 

 

 

 

 

 

 

 

 

When a headphone jack is inserted, the headphone channel level can be adjusted.

Convenient functions

nnAdjusting the volume of groups of speakers (Fader function)

This function lets you adjust (fade) the sound all at once from the front (front speaker / front height speaker / center speaker) or rear (surround speaker / surround back speaker).

1 Press ZONE SELECT to switch the zone mode to J(MAIN ZONE).

The J indicator lights.

2 Press AMP to set the remote control unit to AMP-operation mode.

3 Press CH LEVEL.

4 Press i to select “Fader”, then select the item to be adjusting

using o p.

 

Channel Level

 

Front L

-1.0dB

Front R

-1.0dB

Center

-1.0dB

Subwoofer

+0.5dB

Surround L

0.0dB

Surround R

0.0dB

version Basic

version Advanced

Information

4 Use ui to select the speaker.

The speaker that can be set switches each time one of the buttons is pressed.

BD

62

Fader

Front

Rear

 

 

 

5 Use o p to adjust the volume of the speakers. (o : front, p: rear)

The fader function does not affect the subwoofer.

The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of –12 dB.