Playback in ZONE2 (Separate room)
•You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located).
•You can simultaneously play back the same source in both the MAIN ZONE, ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2.
version Basic
There are two methods to do this, as described below. Choose one of the methods.
qZone playback by speaker output w Zone playback by audio output
Use an external amplifier.
q Zone playback by speaker outputThe ZONE2 audio signals are output from this unit’s SURR.BACK/AMP ASSIGN speaker terminals using the amplifier assignment function.
nnConnecting and setting the speakers“Amp Assign” setting (vpage 86) and | Connecting the speakers | |||
audio signals output | ||||
|
| |||
|
| ZONE2 | ||
ZONE2 | Output signal : |
|
| |
Stereo (L / R) | (L) | (R) | ||
|
| |||
|
| w q w | q |
The audio signals of this unit’s ZONE2 audio output terminals are output to the ZONE2 amplifiers and played on this amplifiers.
ZONE2 | MAIN ZONE |
This unit
AUX IN
R L
•Adjust the volume on the connected amplifier.
•We recommend using high quality
•Also be sure to read the operating instructions of the connected devices.
NOTE
It is not possible to play the digital audio signals input from the HDMI, COAXIAL or OPTICAL connectors in ZONE2. Play using analog connections (in stereo).
version Advanced
Information
BD | 70 |