DreamGEAR VSX-94TXH, VSX-92TXH Plugging in the receiver, AC outlet, FM wire antenna, m to 6 m

03Connecting your equipment

FM wire antenna

•Connect the FM wire antenna to the FM UNBAL 75 Ω in the same way as the AM antenna.

For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.

Connecting external antennas

To improve FM reception connect an external FM antenna to the FM UNBAL 75 Ω.

75 Ω coaxial cable

ANTENNA

FM UNBAL 75 Ω AM LOOP

To improve AM reception, connect a 5 m to 6 m (15 ft. to

18ft.) length of vinyl-coated wire to the AM LOOP terminals without disconnecting the supplied AM loop antenna.

For the best possible reception, suspend horizontally outdoors.

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

		5 m to 6 m
	ANTENNA	(15 ft. to 18 ft.)
FM UNBAL 75 Ω	AM LOOP

Plugging in the receiver

Only plug in after you have connected all your components to this receiver, including the speakers.

•Plug the AC power cord into a convenient AC power outlet.

Caution

•Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cables. The power cords should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest Pioneer authorized independent service company for a replacement.

•The receiver should be disconnected by removing the mains plug from the wall socket when not in regular use, e.g., when on vacation.

•Make sure the blue  STANDBY/ON light has gone out before unplugging.

AC outlet

Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).

Caution

•Do not connect a TV set, monitor, heater, or similar appliance to this unit’s AC outlet.

•Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.

•Since a subwoofer or power amplifier can exceed the 100 W maximum when playing sources at a high volume, this type of equipment should not be connected to the AC outlet.

22

En