8. Using On-Screen Menu
Status
Displaying Current Status of Link Mode
When selecting the tab "Status", you will get the following dia- log box.
Master ID | Indicates the Master projector |
Status | Indicates the status of the master pro- |
| jector |
Connected PJ | Indicates number of connected slave |
| projectors |
Slave No | Indicates serial number of the slave pro- |
| jector |
ID | Indicates ID of a slave projector |
Status | Indicates the status of the slave projec- |
| tor |
Reconnect button .... | Confirms connection of all linked projec- |
| tors |
Status items |
|
Running | The projector is now working |
Cooling Lamp | The fan is now cooling the lamp |
Standby | The projector is in |
Communication Error ... | A communication error has occurred |
Connecting | The projector is now verifying for con- |
| nection |
Error Standby | An error caused the projector to enter |
| the |
LAN Mode
This feature allows you to set various setting items when the projector is used on your network.
Consult with your network administrator about these settings.
NOTE:
•Connect an Ethernet LAN cable to the LAN port
•NEC's optional wireless LAN card is available. For more information on inserting or ejecting a LAN card, see page
•Either PC Card Slots 1 or 2 can accept LAN card. If two LAN cards are inserted into both PC card slots, the first inserted one is effective.
•The standard
CAUTION: Make sure that the LAN card is removed during Standby mode (NOT Idle mode)or with the main power off.Failure to do so may cause damage to the LAN card,or may cause the projector to malfunction.Should a malfunction occur, turn off the main power and turn it back on.
Status
LAN Card
This option selects to use either LAN feature between the stan- dard LAN port
Projector Name
Specify a unique projector name. Press to display the soft- ware keyboard and type in. Up to 16 alphanumeric characters can be used.
IP Address | Indicates the IP address of the projec- |
| tor. |
Subnet Mask | Indicates the subnet mask of the projec- |
| tor. |
Gateway | Indicates the gateway of network con- |
| nected to the projector. |
MAC Address | Indicates the MAC address of the LAN |
| card. |
Advanced | Displays the IP Address setting window. |
Reconnect | Use this button to connect the projector |
| to a network. |
NOTE: Once you have selected "OK" on the Advanced screen, you cannot cancel the changes using "Cancel" on the LAN Mode screen.
