8. Using On-Screen Menu
Edit | .............. Enables you to change source names or assign |
| the direct key. |
| Source Name |
| Enter a signal name. Up to 18 alphanumeric char- |
| acters can be used. |
| Input Terminal |
| Change the input terminal. RGB1 and RGB2 are |
| available for RGB signal; Video and |
| available for composite signal. |
| Direct key |
| You can assign specific remote keys for direct |
| signal input selection. |
| Lock |
| Set so that the selected signal cannot be deleted |
| when "All Delete" is executed. The changes can- |
| not be saved. |
| Skip |
| Set so that the selected signal will be skipped |
| during auto search. |
| When complete, select OK and press ENTER. |
| To exit without storing setting, select Cancel. |
| Select "Source Name" and press ENTER to dis- |
| play the Source Name Edit window. You can |
| change source name on this window. Press [] |
| to display the software keyboard, which you can |
| enter alphanumeric characters. See page |
| for the key function of the software keyboard. |
All Delete ..... This feature enables you to delete all the regis-
tered signals in the Entry List.
The following buttons are not available for the currently project- ing signals:
1)The Cut and Paste buttons on the Entry Edit Command screen
2)The Input Terminal button on the Entry Edit screen
Adjust (Source)
Picture
Brightness
Adjusts the brightness level or the back raster intensity.
Contrast
Adjusts the intensity of the image according to the incoming signal.
Saturation
Adjust saturation at the white peak.
Color
Increases or decreases the color saturation level (not avail- able for RGB).
Hue
Varies the color level from +/- green to
Sharpness
Controls the detail of the image for Video (not available for RGB).
Video Adjust (not available for RGB)
Noise Reduction
Select one of the three levels for reducing video noise: Low, Me- dium or High.
NOTE: The lower the Noise Reduction level, the better the image quality by way of higher video bandwidth.
Color Matrix
Select an appropriate color matrix for your input signal, either HDTV or SDTV.
Y/C Delay
Adjusts Y/C delay level.
YTR Adjustment
Adjusts luminance transient time.
CTR Adjustment
Adjusts chroma transient time.
