Section 3: Configuration

Potentiometer Adjustments

PITCH

After the pitch has been set with the LCD Control Panel, it is sometimes desirable to make minor adjustments. This can be done using the PITCH potentiometer on the top panel. This potentiometer is set at the factory so that it has a range of +/- 3.75 mm. The midpoint setting should have no effect on the pitch. Turning the potentiometer all the way clockwise should move the print position 3.75 mm up towards the top edge of the label. Turning it all the way counterclockwise should move the print position down 3.75 mm.

1.While depressing the FEED key on the front panel, power the printer on.

2.When you hear one beep from the printer, release the FEED key and the printer will display on the LCD panel a message asking what type of Test Label you want to print.

3.Use the Cursor keys to step to the Configuration selection and press the ENTER key to accept the selection.

4.Use the Cursor keys to select the Test Label Size. After the size is selected, press the ENTER key to accept the selection and the printer will begin to print test labels continuously.

5.Adjust the PITCH potentiometer on the front panel until the first print position is at the desired location on the label. If the potentiometer does not have enough range, then you will have to change the pitch setting using the front panel display.

6.Press the FEED key to stop the printer.

7.To exit the Test Label mode, power the printer off and then back on.

Adjusting the PITCH potentiometer will affect the stop position of the label.

BACKFEED OFFSET

When a label is printed it must be correctly positioned for dispensing and application. The Backfeed adjustment is used to position the label so that it is fully dispensed and ready for application. It may then be necessary to reposition the next label before printing. The Backfeed (repositioning of the label) operation is enabled if DSW3-4 is in the Off position. If Backfeed is enabled, placing DSW3-1 is in the Off position will cause the backfeed operation to be performed immediately before each label is printed. If DSW3-1 is in the On position, the backfeed operation is performed as soon as the dispensed label has been printed and taken from the printer.

The amount of backfeed is controlled by the OFFSET potentiometer on the DIP Switch Panel inside the cover. When turned all the way counterclockwise, the amount of backfeed is +3.75 mm, and -3.75 mm when turned all the way counterclockwise.

1.Turn the printer on.

2.Press the LINE key to place the printer in the Off Line status.

3.Press the FEED key to feed out a blank label.

4.Adjust the position using the OFFSET potentiometer on the front control panel and feed another label by depressing the FEED key. Repeat this procedure until the label is fully released from the liner.

Page 3-8

GMTDPH-MAN

PANDUIT TDP4*H

Page 33 Page 35
Page 34
Image 34
Panduit TDP42H, TDP43H, TDP46H manual Potentiometer Adjustments, Pitch, Backfeed Offset
Page 33 Page 35

TDP46H, TDP43H, TDP42H specifications

Panduit is a well-respected name in the field of network and cabling solutions, and their TDP series of identification printers, specifically the TDP42H, TDP43H, and TDP46H, showcase advanced technologies that cater to the diverse needs of modern enterprises.

The TDP42H is known for its high-resolution printing capability and versatility, allowing users to print labels in various formats and sizes. This printer employs thermal transfer technology, ensuring that the print quality remains sharp and durable over time. It features a user-friendly interface that allows for quick and easy setup, making it accessible for both seasoned professionals and newcomers alike. One of the standout features of the TDP42H is its ability to produce both indoor and outdoor labels, thanks to its weather-resistant materials, which are ideal for challenging environments.

The TDP43H builds on the strengths of the TDP42H by offering enhanced connectivity options. It supports wireless printing and is compatible with various mobile devices, allowing for seamless operation in a range of settings. Additionally, it has a larger printing area, which allows for more extensive information on each label. This makes it suitable for more complex identification tasks in industrial settings. The TDP43H also incorporates advanced software capabilities, enabling users to design custom labels that meet the specific needs of their projects.

On the other hand, the TDP46H is built for high-volume printing tasks. It boasts a faster printing speed and a higher print resolution compared to its counterparts. This printer is ideal for environments where efficiency and productivity are paramount. The TDP46H features a robust design that can withstand the rigors of frequent use, ensuring reliability in demanding situations. Furthermore, it integrates with various Panduit software applications, enabling effortless label design and printing.

Overall, the Panduit TDP series printers, including the TDP42H, TDP43H, and TDP46H, are engineered for adaptability, real-time printing efficiency, and high-quality output. Their combination of advanced technologies and robust design makes them essential tools for businesses seeking to enhance their labeling capabilities. Whether it’s for warehouses, data centers, or office environments, these printers offer innovative solutions tailored to the numerous challenges faced in the world of identification and labeling.
Top Page Image Contents