![](/images/new-backgrounds/1108570/10857043x1.webp)
Section 2: Installation
Operator Panel
LCD
DISPLAY PANEL
LINE | FEED |
POWER |
|
LABEL | |
RIBBON | OFFSET |
ERROR | PITCH |
ON LINE | DISPLAY |
Not Used | DSW2 | DSW3 |
The PANDUIT ® TDP4*H Operator Panel consists of five LED indicators, two momentary contact switches, three DIP switches, four adjustment potentiometers and one LCD Display. All of these are accessible from the front of the printer. They are used to set the printer operating parameters and to indicate the status of the printer to the operator. After you power on the printer, familiarize yourself with the keys and indicators as it will help you understand the configuration process.
Potenitometer to adjust print darkness (fine tuning). | |
OFFSET | Potentiometer to adjust amount of back/forward feed for |
| position |
PITCH | Potentiometer to adjust home position of the label |
| of label feed, print position and dispense position. |
DISPLAY | Potentiometer to adjust the contrast of the LCD display. |
POWER | LED, illuminated when the power is on. |
LABEL | LED, Illuminated when the label supply is not detected. |
RIBBON | LED, illuminated when the ribbon motion sensor does not detect any ribbon motion |
| (ribbout out condition). |
ERROR | LED, illuminated when there is a system fault such as an open print head. |
Page |
| PANDUIT TDP4*H |