Section 3: Configuration
COUNTERS MODE
The Counter Mode is provided to allow the user to access the internal printer counters.
ADVANCED MODE
COUNTERS MODE
COUNTERS
HD CUT LIFE
HEAD COUNTER
0.5M
HEAD COUNT CLEAR
YES NO
The Counter Mode is accessed from the Advanced Mode. Press the LINE key to step to the Counter Mode.
Pressing the Feed key will advance the display to the counter selections.
The counters are identified in the display as:
HD: Head Counter (should be reset when print head is replaced)
CUT: cutter Counter
LIFE: Life counter (cannot be reset)
1.Use the LINE key to step the cursor to the desired counter, the Head (HD) counter of the LIFE counter. The default position is the Head counter.
2.Once the correct setting is selected, pressing the FEED key will display the current value (in meters) stored in the counter. The maximum number of digits displayed is 8.
3.Pressing the FEED key again will advance the counter to the Clear mode. All counters with the exception of the LIFE counter may be cleared.
4.Use the LINE key to select the desired setting. If you only wanted to read the counter value, select NO. If you want to read the counter and reset it to 0.0, place the cursor over the YES. Once the desired setting is selected, pressing the FEED key will advance the return you to the Counters Mode display.
COUNTERS MODE
5.To exit the Counters Mode, turn power to the printer off and then back on.
TEST PRINT MODE
The Test Print MOde offers 4 different status labels for troubleshooting. If
V05.00.03.00
INITIALIZING
Displays the firmware during the initialization.
PANDUIT TDP4*H | Page |
