![](/images/new-backgrounds/1108570/1085709x1.webp)
S E C T I O N 1 .
Pr i n t e r O v e r v i e w
Introduction
The PANDUIT ® TDP42H, TDP43H and TDP46H Thermal Transfer Printers, hereafter referred to as TDP4*H, are complete,
The Operator’s Manual will help you understand the basic operations of the printer such as setup, installation, configuration, cleaning and maintenance.
The TDP4*H series can print labels up to four inches wide and is available in three resolutions; 203 dpi, 305 dpi and 609 dpi. The resolution is determined by the print head that is installed in the printer and can be changed in the field simply by installing the desired print head. The printer automatically detects the resolution of the print head and loads the appropriate controlling firmware.
The TDP4*H series uses the standard SATO RISC printer command codes. The only differences between it and other RISC printers are the allowable values representing the print positions on the label. These values are specified in “dots” and will vary depending upon the resolution of the printer and the amount of memory available for imaging the label.
This commonality makes it very easy to convert labels from RISC printer to another without having to create an entirely different command stream. There are some caveats that must be observed though to compensate for the different resolution print heads. The effect of the different printer resolutions are best illustrated by taking a label designed for a 203 dpi printer and sending the command stream to its 305 dpi counterpart. The label printed will be an exact
*2 - 203 dpi, 3 - 305 dpi, 6 - 609 dpi
PANDUIT TDP4*H | Page |