Dukane 9060 user manual Assigning Projector IDs, Slave projector

7. Setting Up for Double Stacking in Link Mode

z Stacking and Connecting the Projectors

NOTE: Up to two units can be gravity stacked without external support. In some cases, however, two images will not align on the screen correctly. This will become more apparent when displaying small text and detailed graphics.

Master projector

Slave projector
	CAUTION: To prevent the projectors from falling, install them in a place and fasten them in a
	way with sufficient strength to support the two projectors. The projector with a lens weighs 21
	kg/46.3 lbs.

z-1. Assigning Projector IDs

You can operate multiple projectors with the same remote con- trol.

To do so:

z-1-1. Select [Projector Options] → [Link Mode] → [Settings] → [Projector ID] a-nd assign an ID number to each projector. See also page 8-18.

z-1-3. On the remote control specify the ID number of the pro- jector to be adjusted. Press and hold the CTL and press MENU (ADDRESS) button to enter the ID number.

You can operate the projector assigned the same ID number as the remote control.

NOTE: Specifying "None" for projector ID allows you to operate multiple projectors concurrently. However, some projectors may not synchronize to the other projec- tors.

z-1-2. Select the same communication speed for both the pro- jector.

NOTE: Do not turn on [Master] or [Slave] at this time.

7-2