8. Using On-Screen Menu
Enabling Sleep Timer
1.Select your desired time between 30 minutes and 16 hours: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2.Select “Set” and press the ENTER button on the remote control.
3.The remaining time starts counting down.
4.The projector will turn off after the countdown is complete.
NOTE:
•To cancel the preset time, set "Off" for the preset time or turn off the power.
•When the remaining time reaches 3 minutes before the projector is turned off, the "Projector will turn off in 3 minutes" message will be displayed on the bottom of the screen.
Using Capture
Allows you to capture an image from a source that is currently being displayed. The image is saved as JPEG in the PC card. When you select Capture from the menu, you will get a tool bar. You can capture an image directly using the tool bar when the menu is not displayed. See page
Using PC Card Files
The PC Card Files feature allows you to display a list of all the files stored in the PC card so that you can select a file you want to display. You can also sort files by file name or date, or display the file. See page
Changing Background Logo:
You can change the default background logo using the PC Card Files feature. See page
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP are not available. See page
Using ChalkBoard
The ChalkBoard feature allows you to write and draw messages on a projected image. See page
NOTE: This feature is available only when using with USB mouse.
Help
Contents
Provides an online help about how to use the menus. An under- lined link means that you can move to an adjustment item di- rectly.
Selecting the underlined link and pressing ENTER moves to the corresponding adjustment item.
NOTE: The Help menu may not be displayed correctly when an image is overscanned.
Source Information
Information
Displays the status of the current signal. This dialog box has two pages.
Page 1
Source Name, Input Terminal, Entry No., Horizontal Frequency, Vertical Frequency, Sync Polarity
