Panasonic PT-L795U Adjusting the picture position, When adjusting the horizontal position H-POSI

Adjusting the picture position

If the picture is not correctly positioned within the display area of the screen so that part of the edge of the picture does not appear, adjust the position of the picture.

The adjustment procedure below describes the on-screen displays when a signal is being input to the S-VIDEO IN terminal or the VIDEO IN terminal.

Adjustment procedure <for horizontal position adjustment>

1.Press the MENU button to display the MENU screen.

2.Press the “ ” and “ ” buttons to select “POSITION”.

3.Press the ENTER button to display the POSITION screen.

4.Press the “ ” and “ ” buttons to select “H-POSI”.

To adjust the vertical position of the picture, select “V-POSI” instead.

5. Press the ENTER, “ ” or “ ” button to display the H-POSI individual adjustment screen.

6. Continue pressing the “ ” and “ ” buttons to adjust the H-POSI setting.

The current setting will be displayed on the screen by numerals and a bar.
Adjustment func-
tion display
Numeric adjustment	Bar display
level display

<When adjusting the horizontal position (H-POSI)>

If the “ ” button is pressed, the picture moves to the right.

If the “ ” button is pressed, the picture moves to the left.

<When adjusting the vertical position (V-POSI)>

If the “ ” button is pressed, the picture moves up.

If the “ ” button is pressed, the picture moves down.

NOTE:

If approximately five seconds pass without any buttons being pressed while an individual adjustment screen is being displayed, the display will return to the POSITION screen.

If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed.

29