Setting procedure

Setting the background color (screen color) when no signal is input or when the video signal is muted

The projector can be set to project either a solid blue image or a solid black image onto the screen if nothing is connected to the projector’s input terminals, or if equipment is connected but no signal is being input from it. This setting is also effective when picture muting is active and when the countdown timer is running.

At the time of shipment from the factory, the color is set to “BLUE”.

1.Press the MENU button to display the MENU screen.

2.Press the “ ” and " " buttons to select “OPTION”.

3.Press the ENTER button to display the OPTION screen.

4.Press the " " and " " buttons to select “BACK COLOR”.

5.Press the “ ” and “ ” buttons to change the setting to “BLUE” or “BLACK”.

l This will set the color to be projected when no signal is being input.

NOTE:

If a signal that the projector cannot recognize is input, the projector will consider this to be no signal.

If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed.

Using the MUTE remote control unit button to turn off both sound and picture

At the time of shipment from the factory, the MUTE button on the remote control unit is set so that only the sound is muted when the button is pressed. If you would like the picture to be muted along with the sound, set the PICTURE MUTE function to “ON” by the following procedure.