Panasonic PT-L795U manual Adjusting the video size, For overscanning, For underscanning

Adjusting the video size

The video size can be adjusted to overscan and underscan sizes only when VIDEO and S-VIDEO signals are being input. Adjust by the following procedure.

Adjustment procedure

1.Press the MENU button to display the menu screen.

2.Press the “ ” and “ ” buttons to select “POSITION”.

3.Press the ENTER button to display the POSITION screen.

4.Press the “ ” and “ ” buttons to select “VIDEO SIZE”.

5.Press the ENTER, “ ” or " ” button to display the VIDEO SIZE individual adjustment screen.

6.Continue pressing the " ” and “ ” buttons to adjust the VIDEO SIZE setting. The current setting will be displayed on the screen by numerals and a bar.

Adjustment func- tion display

Numeric adjustment	Bar display
level display

<For overscanning>

Press the “ ” arrow button. The picture will extend to the right and downward.

<For underscanning>

Press the “ ” arrow button. The picture will contract to the left and upward.

NOTE:

If video size adjustment results in the picture position tending to one side, adjust the position while referring to page 29.

If no button is pressed for approximately 5 seconds while an individual adjustment screen is being displayed, the display will return to the PICTURE screen.

If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed.

3 0