Before using the remote control unit
Inserting the batteries
Insert the AA batteries supplied with the remote control unit making sure that the polarities are correct.
Open the battery compartment cover.
Push the section with the mark down firmly, and then pull the cover toward you to remove it.
Insert the batteries.
Insert the batteries so that their direction matches the polarity markings inside the compartment.
NOTE:
Do not use rechargeable
Close the battery compartment cover.
Return the battery compartment cover to its original position.
Notes on using the batteries
The following should be observed in order to prevent damage to or leaking of the batteries.
Old Batteries | New Batteries |
Replace both batteries at the same time. Furthermore, do not burn spent batteries or put them in with combustible garbage.
Do not mix old and new batteries or batteries of different types (such as alkali and manganese batteries).
DO NOT do any of the following:
NG | NG | NG | NG |
Do not recharge | Do not | Do not open | Do not heat or burn |
9
