Projector
<Top and front>
RGB button (page 20)
This button is used to switch the selected input source between RGB 1 and RGB 2.
VIDEO button (page 20) This button is used to switch the selected input source between VIDEO and
Arrow ( , and ) buttons
These buttons are used to select and adjust items in the
ENTER button
This button is used to accept and to activate items selected in the
FOCUS adjustment +/- buttons (page 18)
These buttons are used to adjust the picture focus.
POWER button (page 13) This button is used to turn projection of the picture on and off.
MENU button
This button is used to display and clear the MENU screen and to return to a
ZOOM adjustment +/- buttons
(page 18)
These buttons are used to adjust the picture size.
These are
Carrying handle
Pull out the handle and hold it when transporting the projector.
MAIN POWER switch (page 13)
This switch turns the power supply to the projector on and off.
Fuse holder (page 4)
Power input socket (AC IN)
The power cord which is supplied with the projector is connected here.
LENS SHIFT dial (page 16)
Turning this dial moves the lens up and down. Use it to make fine adjustments to the lens position when setting up the projector.
Remote control signal receptor (page 10) This receives the infrared signal transmissions from the remote control unit.
Focus ring (page 18) This ring is used to adjust the image focus.
Air outlet port
Projection lens
This lens enlarges the image and projects it onto the screen.
Lens cap
TEMP indicator (page 43)
This indicator illuminates or flashes as a warning if the temperature inside the projector reaches an abnormal level.
LAMP indicator (page 43)
This indicator illuminates when the useful life of the lamp is coming to an end, and it flashes when there is a problem with the lamp unit.
Power indicator (page 13)
This indicator becomes red when the MAIN POWER switch is turned to ON. It changes to green when the power is turned on. When this indicator is orange, it indicates that the power has been turned off but the cooling fan is still operating (for approximately 90 seconds), or that the power saving function has activated and the light source lamps have been switched off.
7
