Operating range of the remote control unit
Point the remote control unit toward the remote control signal receptor on the front or the rear of the projector to operate the projector. Refer to the illustration below for the operating range of the remote control unit.
<Top view>
|
|
|
| 23.0 feet |
|
|
|
|
| (approx. 7 m) |
|
Remote control | Remote control | Projector | Remote control | Remote con- | |
unit |
| signal receptor | signal receptor | trol unit | |
|
| ||||
<Side view> | 23.0 feet |
|
|
| |
| (approx. 7 m) |
|
|
| |
23.0 feet (approx. 7 m)
NOTE:
The operating distance is within 23.0 feet (approximately 7 meters) from directly in front of the front or rear remote control signal receptors. Furthermore, If using the rear 60° (left and right) function to transmit the remote control signals, the operating distance is also 23.0 feet (7 meters).
If strong light is allowed to shine onto the remote control signal receptor, or if there are any obstacles between the remote control signal receptor and the remote control unit, correct remote control operation may not be possible.
If facing the remote control unit toward the screen
The projector can also be operated by pointing the remote control unit toward the screen as shown in the illustration below.
Screen
Projector
NOTE:
If facing the remote control unit toward the screen to operate the projector, the operating range of the remote control unit will be limited by the amount of light reflection loss caused by the characteristics of the screen used. The transmit function of the remote control unit can transmit within a range of 60° in the forward direction and 60° in the backward direction (60° on both left and right sides), assuming a method of use such as that shown above.
Illuminating the remote control unit buttons
If the LIGHT button on the remote control unit is pressed, the buttons on the remote control unit are illuminated for approximately 10 seconds.
LIGHT button | NOTE: |
| If the LIGHT button is pressed once more while the remote control unit buttons are |
| illuminated, the illumination period will be extended for a further 10 seconds. |
| If any other buttons are pressed while the buttons are illuminated, the illumination will |
| switch off, and will switch back on again for a further 10 seconds once the button which |
| was pressed is then released. |
10
