EMC DS-16B manual Gateway address, To enter the gateway address, Domain, BBcredit

Switch Management

Gateway Address Pressing <Enter> while Gateway address is selected, displays:

Gateway address:

0.0. 0. 0

The default gateway address is shown above. You must enter a valid gateway address, if required.

To enter the gateway address

1.Use <Up> and <Down> to increment or decrement the displayed value. The underlined cursor indicates the numbers to modify.

2.After entering a number, press <Tab/Esc> to move the cursor to modify the next field.

3.After setting the gateway address, pressing <Enter> stores the value.

Domain Pressing <Enter> while Domain is selected, displays:

Domain:

0

The domain number uniquely identifies the switch in a Fabric. This switch ID is normally automatically assigned by the switch and may be any value between 1 and 239. If VC-Encoded Address Mode is in effect, then the values are between 0 and 31. You may also assign this number manually.

BB_credit Pressing <Enter> while BB_credit is selected, displays:

BB_credit: 16

The number represents the number of buffers, from 1 to 16, available to the host. For a complete description of buffer-to-buffer credit, refer to the industry specification Fibre Channel Physical and Signalling Interface (FC-PH).

Departmental Switch Model DS-16B Hardware Reference Manual