EMC DS-16B Operation Menu, Default values, Allows you to select commands, Operation menu See

Switch Management

	Selecting the Yes option then pressing <Enter> causes all values in the
	Configuration Menu to reset to default conditions. Once the Ethernet
	IP address and the Switchname are changed, they are not reset to
	default values.
		Resetting the switch to default causes all configuration settings, names,
		and passwords entered to be reset to default settings.
Operation Menu	You control the switch’s overall operational state using the Operation
	Menu. Pressing <Enter> while the Operation Menu is selected,
	allows you to select commands:
Table 3-6	Operation Menu
	Operation menu		See Page
	Switch Offline		3-18
	Switch Online		3-19
	Port Disable		3-19
	Port Enable		3-19
	QuickLoop Disable
	QuickLoop Enable
	QuickLoop Port Disable
	QuickLoop Port Enable
	Close Telnet Session
	Reboot		3-20

DS-16B Switch Menus