EMC DS-16B manual CMI message received failed bad

				Error Messages
Table C-3	Diagnostic Error Messages (continued)
Message		Description	Probable Cause	Action
DIAG-CMICKSUM		CMI message received failed bad	ASIC or mainboard	Replace
Err#2036		checksum test.	failure	mainboard
[cmiTest]				assembly
DIAG-CMIDATA		CMI data received did not match data	ASIC or mainboard	Replace
Err#2035		transmitted	failure	mainboard
[cmiTest]				assembly
DIAG-CMIINVCAP		Unintended ASIC erroneously got CMI	ASIC or mainboard	Replace
Err#2034		capture flag	failure	mainboard
[cmiTest]				assembly
DIAG-CMINOCAP		CMI intended receiver ASIC failed to get	ASIC or mainboard	Replace
Err#2033		CMI capture flag.	failure	mainboard
[cmiTest]				assembly
DIAG-CMISA1		An attempt to send a CMI message from	ASIC failure	Replace
Err#2032		ASIC to ASIC failed.		mainboard
[cmiTest]				assembly
DIAG-CMNOBUF		Port could not get any buffer	ASIC failure	Replace
Err#1029				mainboard
[centralMemoryTest]				assembly
DIAG-DATA		Payload received by port did not match	mainboard, GBIC	Replace
Err#266E, 306E		payload transmitted.	module or fiber	mainboard
[portLoopbackTest, crossPortTest]			cable failure	assembly, GBIC
				module or fiber
				cable

Error Message Tables