EMC DS-16B manual Unset QuickLoop Port Configure QuickLoop Partner WWN

					Switch Management
Table 3-3		Front Panel and Telnet Commands (continued)
	Menu		Front Panel	Telnet Command	Default
			Unset QuickLoop Port	configure	0
			QuickLoop Partner WWN	a/Partner	00:00:00:00:00:00:00:00
			Reset to Default	configDefault	N/A
	Operation		Switch Offline	SwitchDisable	N/A
			Switch Online	SwitchEnable	N/A
			Port Disable	portDisable <portno>	N/A
			Port Enable	portEnable <portno>	N/A
			QuickLoop Disable	a/Disable	N/A
			QuickLoop Enable	a/Enable	N/A
			QuickLoop Port Disable	a/Port Disable	N/A
			QuickLoop Port Enable	a/Port Enable	N/A
			Close Telnet Session	logout	N/A
			Reboot	reboot	N/A
	Status		Switch Name	switchShow	N/A
			Worldwide Name	switchShow	N/A
			Firmware Version	version	N/A
			Current Date	date	N/A
			Booted At	version	N/A
			Firmware Date	version	N/A
			Flash Date	version	N/A
			Boot Prom Date	version	N/A
			Up Time	uptime	N/A
			Powered Time	uptime	N/A
			Port Type	switchShow	N/A
			Module Type	switchShow	N/A

DS-16B Switch Menus