Cabletron Systems 2208 manual Switch Configuration Screen, Switch Configuration Screen

Switch Configuration Screen

NOTE

Exiting without saving causes a “NOT SAVED?” message to appear above the SAVE command. Edits are lost if they are not saved before exiting.

The designated workstations now receive traps from the 2H22-08R.

5.10SWITCH CONFIGURATION SCREEN

NOTE

The Switch Configuration Screen will not be available if the operational mode of the device has been set to SECURE FAST VLAN. This screen may only be used by devices configured to operate as 802.1D or 802.1Q switches.

The Switch Configuration screen, Figure 5-17, provides the basic setup options to make a switch operational in your network.

To access the Switch Configuration screen from the Device Configuration Menu screen, use the arrow keys to highlight the SWITCH CONFIGURATION menu item and press ENTER. The Switch Configuration screen displays showing Ports 1 through 8.

2H22-08R SmartSwitch 2208 User’s Guide Page 5-37