Cabletron Systems 2208 manual Unpacking the 2H22-08R, Installing Options

Chapter 3: Installation

3.2UNPACKING THE 2H22-08R

To unpack the 2H22-08R and verify the contents of the shipment, proceed as follows:

1.Open the carton and remove the packing material protecting the 2H22-08R.

2.Verify the contents of the carton as listed in Table 3-1.

Table 3-1 Contents of 2H22-08R Carton

Item	Quantity
2H22-08R	1
Antistatic Wrist Strap	1
Console Cable Kit	1
Rackmount Kit	1
Strain-Relief Bracket	1
Power Cord	2

3.Remove the black and yellow tape seal on the non-conductive bag to remove the 2H22-08R.

4.Perform a visual inspection of the device for any signs of physical damage. If there are any items missing or damaged, contact Cabletron Systems Global Call Center as described in Section 1.7.

3.3INSTALLING OPTIONS

NOTE

Install any optional equipment before proceeding to Section 3.4.

If the 2H22-08R is to be installed with an optional Fast Ethernet Interface Module, refer to Appendix C for installation instructions.

Page 3-2 2H22-08R SmartSwitch 2208 User’s Guide