CHAPTER 2
NETWORK REQUIREMENTS
Before installing the 2H22-08R or Fast Ethernet Interface Module(s) (FE-100TX, FE-100FX, or FE-100F3) in your network, review the requirements and specifications referred to in this chapter to ensure satisfactory equipment performance. Failure to follow these guidelines may produce poor network performance.
The Cabletron Systems Cabling Guide and SmartTrunk User’s Guide, referred to in the following sections, are found on the Cabletron Systems World Wide Web site: http://www.cabletron.com/
2.1SmartTrunk
To connect the 2H22-08R to a network so it can take advantage of the SmartTrunk feature, there are certain rules concerning port connections and configurations that must be followed for proper operation. Refer to the Cabletron Systems SmartTrunk User’s Guide for additional information.
2.210BASE-T NETWORK
When connecting a 10BASE-T segment to any of the 2H22-08R ports (Interfaces 1 through 8), ensure that the network meets the Ethernet network requirements of the IEEE 802.3 standard for 10BASE-T. Refer to the Cabletron Systems Cabling Guide for details.
2H22-08R SmartSwitch 2208 User’s Guide | Page 2-1 |
