SNMP Community Names Screen
2H22-08R SmartSwitch 2208 User’s Guide Page 5-33
The following explains each SNMP Community Names screen field:
Community Name (Modifiable)
Displays the user-defined name through which a user accesses the
2H22-08R SNMP Management. Any Community Name assigned here
acts as a password to Local/Remote Management. To enter a community
name, refer to Section 5.8.1.
Access Policy (Read-Only)
Indicates the access accorded each Community Name. The available
access levels are as follows:
read-only This Community Name gives you read-only
access to the 2H22-08R MIB objects, and
excludes access to security-protected fields of
read-write or super-user authorization.
read-write This Community Name gives you read-write
access to the 2H22-08R MIB objects, excluding
security protected fields for Super-User access
only.
super-user This Community Name gives you read-write
access to the 2H22-08R MIB objects and
allows you to change all modifiable parameters
including community names, IP addresses,
traps, and SNMP objects.
5.8.1 Establishing Community Names
The password used to access Local Management on the Password Screen
must have super-user access to view and edit the SNMP Community
Names screen. Using a password with read-only or read-write access does
not allow a user to view or edit the SNMP Community Names screen.
NOTE Any community name assigned in the SNMP Community
Names screen is a password to its corresponding level of
access to Local Management. The community name assigned
super-user access is the only one that gives the user complete
access to Local Management.