Cabletron Systems 2208 manual System Resources Screen, Xx Kb

Chapter 5: Local Management

5.13SYSTEM RESOURCES SCREEN

The System Resources screen, Figure 5-20, provides information concerning the processor used in the 2H22-08R and the amount of FLASH memory, DRAM, and NVRAM that is installed and how much of that memory is available. This screen also allows you to monitor the current processor (switch) utilization and the peak switch utilization.

To access the System Resources screen from the Device Specific Configuration Menu screen, use the arrow keys to highlight the SYSTEM RESOURCES menu item and press ENTER. The System Resources screen displays.

Event Message Line

	2H22-08R LOCAL MANAGEMENT
	System Resources
Device Type: 2H22-08R			Firmware Revision: XX.XX.XX
			BOOTPROM Revision: XX.XX.XX
	CPU Type:	i960 HT 25Mhz
Flash Memory Installed : X MB		Available:	XXXXX Bytes
DRAM Installed:	XX MB	Available:	XXXXX Bytes
NVRAM Installed:	XX KB	Available:	XXXXX Bytes
	Current Switch Utilization: 66%
	Peak Switch Utilization: 75%
	Reset Peak Switch Utilization: [NO]
				RETURN
SAVE		EXIT		RETURN

2159-40

Figure 5-20 System Resources Screen

The following briefly explains each field on the System Resources screen.

CPU Type (Read-only)

Indicates the microprocessor used in the 2H22-08R.

Page 5-50 2H22-08R SmartSwitch 2208 User’s Guide