Flash Download Screen

Download File Name (Selectable)

Enter the complete TFTP Server path and file name of the new image in this field.

5.14.1 Image File Download Using BootP

To download a firmware image into FLASH using BootP, proceed as follows:

1.Use the arrow keys to highlight the Download Method field.

2.Use the SPACE bar to select BOOTP.

3.Use the arrow keys to highlight the TFTP Gateway IP Addr field.

4.Set the IP address of the TFTP gateway server (this defaults to the same IP address set in the TFTP Gateway IP Addr field in the General Configuration screen).

5.Use the arrow keys to highlight EXECUTE at the bottom of the screen and press ENTER. The message “BOOTP DOWNLOAD. WILL COMMIT TO FLASH. REBOOT IN PROGRESS...” displays in the event message line at the top of the screen and the new image is downloaded into FLASH memory.

5.14.2 Image File Download Using TFTP

To download a firmware image into FLASH using TFTP, proceed as follows:

1.Use the arrow keys to highlight the Download Method field.

2.Use the SPACE bar to select TFTP.

3.Use the arrow keys to highlight the TFTP Gateway IP Addr field.

4.Set the IP address of the TFTP gateway server (this defaults to the same IP address set in the TFTP Gateway IP Addr field on the General Configuration screen).

5.Use the arrow keys to highlight the Download Server IP field.

6.Enter the IP address of the TFTP server using the DDN format. For example: 134.141.79.121

7.Use the arrow keys to highlight the Download File Name field.

2H22-08R SmartSwitch 2208 User’s Guide

Page 5-55

Page 99
Image 99
Cabletron Systems 2208 manual Image File Download Using BootP, Image File Download Using Tftp