Cabletron Systems 2208 manual 10.1

			CONTENTS
5.10	Switch Configuration Screen		5-37
	5.10.1	Setting the STA	5-40
	5.10.2 Setting the Age Time		5-41
	5.10.3 Setting (Enabling or Disabling) the Port Status		............ 5-41
5.11	Ethernet Interface Configuration		5-42
	5.11.1 Configuring an FE-100TX Interface		5-44
	5.11.2 Setting the FE-100TX Operational Mode		5-45
	5.11.3 Setting the FE-100TX Advertised Ability		5-45
	5.11.4 Configuring an FE-100FX or FE-100F3
		Interface for Port 7 or 8	5-46
	5.11.5 Setting the FE-100FX and FE-100F3
		in Operational Mode	5-46
	5.11.6 Setting the Flow Control Admin Status		5-47
5.12	Device Specific Configuration Menu		5-48
5.13	System Resources Screen		5-50
	5.13.1 Setting the Reset Peak Utilization		5-51
5.14	Flash Download Screen		5-52
	5.14.1 Image File Download Using BootP		5-55
	5.14.2 Image File Download Using TFTP		5-55
	5.14.3 Image File Download Using RUNTIME		5-56
5.15	Port Redirect Function Screen		5-57
	5.15.1 Displaying the Source and Destination Entries		5-59
	5.15.2 Changing Source and Destination Ports		5-60
	5.15.3 Changing the Remap Errors Field		5-61
5.16	Broadcast Suppression Screen		5-62
	5.16.1	Setting the Threshold	5-63
	5.16.2 Setting the Reset Peak		5-64
5.17	Device Statistics Menu Screen		5-65
5.18	Switch Statistics Screen		5-67
5.19	Interface Statistics Screen		5-69
	5.19.1	Displaying Interface Statistics	5-72
	5.19.2 Using the Clear Counters Command		5-73
5.20	RMON Statistics Screen		5-74
	5.20.1	Displaying RMON Statistics	5-78
	5.20.2 Using the Clear Counters Command		5-78
5.21	Network Tools		5-79
	5.21.1	Built-in Commands	5-81
	5.21.2	Special Commands	5-92

2H22-08R SmartSwitch 2208 User’s Guide ix