Chapter 5: Local Management
Page 5-8 2H22-08R SmartSwitch 2208 User’s Guide
5.4 ACCESSING LOCAL MANAGEMENT
Access to Local Management is controlled through the Local
Management Password screen shown in Figure 5-3. Whenever a
connection is made to the 2H22-08R, the Password screen displays.
Before continuing, you must enter a password (community name) which
is compared to the previously stored passwords. The level of access
allowed to a user depends on the password. To set or change passwords
refer to Section 5.8.1.
The following steps describe the procedure to access Local Management:
1. Turn on the terminal. Press ENTER (this may take up to four times,
because the COM port of the 2H22-08R auto-senses the baud rate of
the terminal) until the Local Management Password screen displays.
Figure 5-3 Local Management Password Screen
2. Enter the password and press ENTER. The default super-user access
password is “public” or press ENTER.
2H22-08R LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005 USA
(603) 332-9400
(c) Copyright CABLETRON Systems, Inc, 1997
Device Serial Number: XXXXXXXXX
Device Hardware Revision: XX
Device Firmware Revision: X.XX.XX
Device BOOTPROM Revision: X.XX.XX
Enter Password:
22511-12