
Device Configuration Menu Screen
The following briefly explains each screen accessible from the Device Configuration Menu screen:
GENERAL CONFIGURATION
The General Configuration screen allows you to monitor and configure operating parameters for the
to Section 5.7.
SNMP COMMUNITY NAMES
The SNMP Community Names screen allows you to enter new, change, or review the community names used as access passwords for device management operation. Access is dependent on a user’s password level. For details, refer to Section 5.8.
SNMP TRAPS
The SNMP Traps screen provides display and configuration access to the table of IP addresses used for trap destinations and associated community names. For details, refer to Section 5.9.
SWITCH CONFIGURATION
The Switch Configuration screen provides the basic setup options for making a switch operational in the network. For details, refer to Section 5.10.
ETHERNET INTERFACE CONFIGURATION
The Ethernet Interface Configuration screen indicates the link status, current and desired operational mode, and advertised ability for ports 1 through 8 on the
SMARTTRUNK CONFIGURATION
The SmartTrunk Configuration screen allows the user to logically group interfaces together to aggregate high speed uplinks. Refer to the Cabletron Systems SmartTrunk User’s Guide for additional information.
DEVICE SPECIFIC CONFIGURATION
The Device Specific Configuration menu screen allows you to select screens to configure ports or check system resources specific to the
| Page |