Switch Configuration Screen
4.Press ENTER. The message “SAVED OK” displays.
5.10.2 Setting the Age Time
To set the Age Time, proceed as follows:
1.Use the arrow keys to highlight the Age Time field.
2.Enter the desired Age Time in increments of 10. The available Age Time range is 10 seconds to 1,000,000 seconds with the default value being 300 seconds.
3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4.Press ENTER. The message “SAVED OK” displays.
5.10.3 Setting (Enabling or Disabling) the Port Status
To set the status of an interface (port), proceed as follows:
1.Use the arrow keys to highlight the Status field of the port.
2.Use the SPACE bar to toggle to either ENABLED or DISABLED.
3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4.Press ENTER. The message “SAVED OK” displays.
| Page |
