Cabletron Systems 2208 manual Source Port Read-only

Chapter 5: Local Management

To access the Port Redirect Function screen from the Device Specific Configuration Menu screen use the arrow keys to highlight the PORT REDIRECT FUNCTION menu item and press ENTER. The Port Redirect Function screen displays.

Event Message Line

	2H22-08R LOCAL MANAGEMENT
	Port Redirect Function
Device Type: 2H22-08R		Firmware Revision:		XX.XX.XX
		BOOTPROM Revision: XX.XX.XX
Source Port:	Destination Port:	Remap Errors:
============	============	============
1	2	ON
1	3	ON
1	4	ON
2	1	OFF
2	3	OFF
3	4	ON
3	5	ON
3	6	ON
Source Port [1]	Destination Port [1]	Errors	[ON]	Status [ADD]
				RETURN
SAVE	NEXT	PREVIOUS	EXIT		RETURN

1960_22

Figure 5-22 Port Redirect Function Screen

The following definitions briefly explain each field of the Port Redirect Function screen:

Source Port (Read-only)

Shows which ports are currently set as source ports as described in Section 5.15.1.

Destination Port (Read-only)

Shows which ports are currently set as destination ports as described in Section 5.15.1.

Remap Errors (Read-only)

Displays whether the corresponding source ports are configured to send errored frames to the destination ports, or to drop all errored frames before forwarding traffic as described in Section 5.15.3.

Page 5-58 2H22-08R SmartSwitch 2208 User’s Guide