System Configuration Manual
300510EN, Rev AA
December 2010
5-11
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
7. Select the Communication tab.
8. Select the Enable Channel check box to activate the protocol channel.
9. Ensure that the following communication parameters are set:
NOTE!
If handshaking includes DSR, no query will be sent from the TankMaster
Protocol Server if the communication is interrupted. This may result in a
Query Timeout.
10. Click the OK button to store the current configuration and close the
configuration window.
Port Choose the COM port that the host computer will be
connected to.
Baud rate Choose a setting that matches the host setting.
Stop bits Choose a setting that matches the host setting.
Parity Choose a setting that matches the host setting.
Modem Choose the appropriate interface. Select FBM if you are using
a Rosemount 2180 Field Bus Modem.
Handshaking FBM: RTS/CTS/DTR/DSR.
RS485: RTS/CTS.
RS232: See the specifications for the communication software
used on the host system.
Address Set the address to be used by the host computer to identify
the TankMaster workstation.
Description Text that describes the configured channel.