System Configuration Manual

300510EN, Rev AA December 2010

Rosemount Raptor

c.Minimum Level Distance (C)

The Minimum Level Distance (C) is defined as the distance between the Zero Level (Dipping Datum Point) and the minimum level (tank bottom) for the product surface.

By specifying a C-distance the measuring range can be extended to the bottom of the tank.

C>0: the 5900S presents negative level values when the product surface is below the Zero Level.

You can use the Show negative level values as zero check box if you wish to present product levels below the Zero Level (Datum plate) as equal to zero.

C=0: measurements below the Zero Level will not be approved, i.e. the RLG will report “invalid level” if the product level is below the Datum Plate.

12.Enter the Calibration Distance.

Use this variable to adjust the tank height so that measured product levels match hand dipped levels. Normally a minor adjustment is necessary when the level gauge is installed. For example, a minor deviation between the actual tank height and the value stored in the transmitter database may occur if tank dimensions according to drawings are not quite up to date with actual dimensions.

For still-pipeapplications the Calibrate function in the TankMaster WinSetup program is a useful tool to configure the Calibration Distance and the Correction Factor, see “Level Gauge Calibration” on page 5-122for more information.

13.Click the OK button to save the configuration and close the configuration window.

In addition to the configuration steps described above, a basic configuration of the 5900S may include using the Tank Scan function to verify that there are no disturbing objects in the tank that may interfere with the level measurements. Also, the Empty Tank Handling function may be used to optimize measurement performance near the tank bottom.

See “Basic Configuration” in the Rosemount 5900S Reference Manual (Document No. 300520EN) for more information.

Further configuration options are available in the Tank Shape, Environment, and Advanced Configuration tabs, see “Advanced Configuration” on

page 5-62.

Section 5. Installing a Raptor Level Gauging System

5-57

Page 92 Page 94
Page 93
Image 93
Emerson 300510EN configurationmanual Minimum Level Distance C, Enter the Calibration Distance
Page 92 Page 94

300510EN specifications

The Emerson 300510EN is a remarkable product designed to meet the evolving needs of industrial automation. Known for its robust performance and advanced features, it has become an integral component in various industries, ensuring optimal efficiency and reliability in operations.

At the core of the Emerson 300510EN is its high-performance processing capability. It is equipped with an advanced microprocessor that allows for rapid data processing and seamless integration with existing systems. This ensures real-time monitoring and control, enabling companies to make informed decisions quickly and effectively.

One of the standout features of the Emerson 300510EN is its user-friendly interface. The device incorporates a touchscreen display, providing operators with intuitive access to critical information. This simplifies navigation through various functions and settings, enhancing user experience and reducing the risk of errors during operation.

In terms of connectivity, the Emerson 300510EN supports multiple communication protocols, including MODBUS, Ethernet/IP, and Profibus. This versatility allows for seamless integration with a wide range of industrial equipment and systems, facilitating enhanced interoperability in complex automation environments. As industries increasingly adopt IoT technologies, the Emerson 300510EN remains adaptable, ensuring businesses can evolve without significant overhauls of their existing setups.

Reliability is another hallmark of the Emerson 300510EN. The device is designed to withstand harsh industrial environments, with robust casing and components that protect against dust, moisture, and temperature fluctuations. This durability minimizes the risks of downtime, ensuring that operations run smoothly.

The Emerson 300510EN also comes equipped with advanced diagnostic features. These built-in capabilities allow for proactive maintenance and troubleshooting, reducing unexpected failures and associated costs. By providing real-time diagnostics, operators can quickly identify issues and implement solutions before they escalate.

Overall, the Emerson 300510EN stands out as a highly effective solution for industrial automation needs. Its blend of advanced processing power, user-friendly design, versatile connectivity, reliability, and proactive diagnostics makes it an invaluable tool for businesses striving to enhance productivity and efficiency in an increasingly competitive marketplace.
Top Page Image Contents