System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-112 Section 5. Installing a Raptor Level Gauging System
5.11.5 To Change Tank
Configuration
When the tank is installed and configured the current settings can be modified
at any time by opening the corresponding Properties dialog. To open the
Properties dialog for a tank do the following:
1. In the Workspace window select the desired tank.
2. Click the right mouse button and choose the Properties option from the
popup menu.
3. Change the current tank settings by selecting the appropriate tab in the
Properties window. Click the Apply button to store the new configuration
before advancing to the next tab.
Basically the tabs correspond to the different steps in the installation wizard.
See “Installing a Tank” on page5-101 for a description on how to configure a
tank.
Properties