System Configuration Manual
300510EN, Rev AA
December 2010
4-13
Rosemount Raptor
Section 4. The WinSetup Main Window
4.5.3 To Set Required Access Levels
In TankMaster WinSetup, you can set the access level required for the
following actions:
• Tank/Device Install and Uninstall
• Tank/Device Configuration
• Replace, Restore and Restart Device
• P rotocol Configuration
• Exit WinSetup
• Add Program (see “Customizing the Tools Menu in WinSetup” on
page 7-2)
• Start Program (in the Tools menu)
For example, if you are logged on as an Operator (* * * * *), you are not
allowed to exit WinSetup if the required exit level for this action is set to
Supervisor (*) or higher.
To set the required access levels:
1. From the Tools/Administrative Tools menu choose Set Required
Access Levels.
NOTE!
You have to be logged on as an Administrator (* * * * *) to be able to set the
required access levels. To create an Administrator (* * * * *) account, see “To
Administrate User Accounts” on page 4-11.
2. Set the required access levels for each type of action and click the OK
button.