System Configuration Manual
300510EN, Rev AA
December 2010
5-127
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
8. For Local Gravity choose calculation method Manual or Calculated. The
Local Gravity is used as input for calculating the Observed Density.
Manual: enter a local gravity value in the “Value” field.
Calculated: enter the latitude and elevation of the site where the tank is
located.
9. Click the OK button to store the configuration and close the window.
10. In the Workspace window select the ATD device icon:
11. Click the right mouse button and select Properties, or
from the Service menu choose Devices>Properties to open the
22XX ATD window.
12. Select the Advanced Parameter Source Configuration tab.