Emerson 300510EN configurationmanual Action Buttons

System Configuration Manual

Rosemount Raptor

300510EN, Rev AA December 2010

7.10.4 Action Buttons

The following buttons can be found in the Tank Scan window:

Save See “File Storage” on page 7-26.

Stored	See “File Storage” on page 7-26.
Echoes
Reread From	At any time, you can refresh tank echo and echo
Gauge	peaks with the Reread From Gauge button. The
	Tank Scan will display the new echo curve as a black
	line, and up to two previous echo curves in grey
	color. The previous echo peaks will appear with
	small crosses.
Print	Opens the print dialogue and prints the Tank Scan
	window.
Apply	When changing a parameter that affects echo peak
	detection (e.g. General Amplitude Threshold), you
	will have to press the Apply button to write these
	settings to the internal memory of gauge. It takes a
	few seconds for the gauge to update the echo peak
	data (up to 30 seconds due to the echo peak filtering
	function in the gauge).
	Finally, press the Reread from Gauge button to
	update the echo peak information in the graph area.
OK	Applies changes and closes the window.
Cancel	Cancels all changes.
Help	Opens the online help for the window.

7-30 Section 7. Service Functions