System Configuration Manual
300510EN, Rev AA
December 2010
5-13
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
Tank mapping configuration
The slave protocol allows you to send data from a Rosemount Tank Gauging
system to a host computer. In the Tank Mapping window you can specify from
which tanks to collect data for the host system:
1. In the Slave Protocol Channel Configuration window, select the Tank
Mapping tab:
2. From the list of tanks that appear in the Available Tanks pane, select the
tanks that the host will connect to.
3. Click the button to move the selected tanks to the list of Mapped
Tank s.
Ensure that the tanks appear in the order required by the host system.
When the host sends a query, TankMaster responds by sending tank
data in the order as the tanks are listed in the Mapped Tanks column.
You can easily change the position of mapped tanks by using the
and buttons.
4. Click the OK button to save the current configuration and close the
window.