System Configuration Manual
300510EN, Rev AA
December 2010
5-7
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
5.2.1 Master Protocol
Channel
Configuration
To configure a communication protocol do the following:
1. Open the Protocols folder in the Workspace window.
2. Select the icon that corresponds to the particular protocol to be
configured (this example will show the Modbus Master protocol).
3. Click the right mouse button and select Properties, or choose
Protocols/Properties from the Service menu.
4. The Protocol Properties window lists an overview of protocol channels.
For each channel the corresponding icon indicates whether the channel
is enabled or disabled.
5. Select the desired channel.
6. Click the Properties button to configure the protocol channel.
1. Select the Modbus
Master protocol icon
2. Click the right mouse
button and select Properties
Properties