System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-40 Section 5. Installing a Raptor Level Gauging System
Communication Setup
6. Specify whether TankMaster communicates directly with the 2410 Tank
Hub, or via a 2160 Field Communication Unit.
7. If the 2410 Tank Hub is connected to a 2160 FCU, select the appropriate
2160 from the FCU Tag drop-down list.
8. If the 2410 is connected directly to a TankMaster PC and not via a 2160
FCU, specify the communication protocol channel which is associated
with the communication port on the TankMaster workstation. To check
which channels are enabled:
a. in the WinSetup workspace open the Protocols folder
b. click the right mous e button on the ModbusMaster protocol icon
c. choose the Properties option
To check which communication port that is associated with a certain
channel:
a. right-click the protocol channe l icon
b. open the Communication tab and check which communication port
that is selected.
See chapter “Master Protocol Channel Configuration” on page5-7 for
more information on how to configure communication protocols.