XDF Components
3.0XDF COMPONENTS
3.1Standard
3.1.1Frame
The
The XDF frame consists of
Cutouts in the top (front and rear) permit customer cable entry (Figure 6). All units have casters, stabilizing feet and a grounding lug.
3.1.2Enclosure
The XDF is equipped with seals to maintain a separate air volume inside the equipment compart- ment.
NOTE
Preventing air infiltration into the XDF will significantly improve overall performance and reduce the amount of condensate generated. Ensure that all cable entrances are sealed and that doors are closed securely. Check to ensure that all panels are properly installed; this is especially important if panels have been removed in the field.
3.1.3Doors
The front and rear doors are framed from sheet metal and are removable. A
3.1.4Side Panels
Side panels are constructed of sheet metal and use special fasteners to permit removal for mainte- nance. Insulation is included to provide improved thermal and sound insulation, as well as to prevent condensate formation on the outside of the unit.
9
