Installation
4.0INSTALLATION
4.1Inspection
Upon arrival of the unit, and before unpacking it, verify that the delivered equipment matches the bill of lading. Examine the packaging for any signs of mishandling or damage. Inspect all items for dam- age, visible or concealed. Report any damage immediately to the carrier and file a damage claim. Send a copy to Liebert Corporation or to your sales representative.
Packing Material
All material used to package this unit is recyclable. Please save the material for future use or dispose of it appropriately.
4.2Recommended Setup Equipment
•pallet jack or forklift
•utility knife
•3/8" ratchet or wrench
4.3Unloading the XDF
! WARNING
Risk of
Read all of the following instructions before attempting to move, lift or remove packaging from the unit.
! CAUTION
Risk of sharp edges, splinters and exposed fasteners. Can cause personal injury.
Only trained personnel wearing appropriate safety headgear, gloves, shoes and glasses should attempt to move, lift or remove packaging from the unit or prepare the unit for installation.
!CAUTION
Risk of overhead interference. Can damage the unit and structure.
The unit may be too tall to fit through a doorway while on the skid. Measure the unit and doorway heights and refer to the installation plans to verify clearances before moving the unit.
! CAUTION
Risk of frozen fluids. Can cause equipment damage.
Keep the unit upright, indoors and protected from dampness, freezing temperatures and contact damage.
16
